アルトライダー ムルティストラーダ1200 スライダー類 クラッシュバーフレームスライダーキット Ducati Multistrada 1200(15-) ブラック:GooBikeParts支店 - 7cb4b

2019-06-02
カテゴリトップ > パーツ > フレーム > スライダー類 > フレームスライダー・スキッドパッド
アルトライダー ムルティストラーダ1200 スライダー類 クラッシュバーフレームスライダーキット Ducati Multistrada 1200(15-) ブラックアルトライダー
クラッシュバーフレームスライダーキット Ducati Multistrada 1200(15-)
カラー:ブラック
メーカー品番:MU15-2-1002

●仕様
■1 inch stainless steel construction
■Hand TIG welding
■Includes frame sliders and chromoly steel bolt
■Height:16 inches (40.6 cm)
■Width:6 inches (15.2 cm)
■Depth:10 inches (25.4 cm)
■Weight:10 lbs (4.5 kg)

●備考
Renewable protection.

A machine like the Multistrada requires the best protection available which is why we created the AltRider Crash Bars for the Ducati Multistrada 1200.

Made of 1 inch stainless steel these crash bars are built with precision-manufactured mounts that integrate directly into the motorcycles frame through the motor mount. They are self-reinforced by a cross bar and wrap protectively around the fairings radiator and water pump. The AltRider Crash Bars are made with a shot peen satin finish so even after the bike takes a spill the stainless bars will never show signs of rust.

Seamless installation of frame sliders rounds out an attractive and strong solution. Made from abrasion and impact resistant plastic these sliders integrate seamlessly into the AltRider Crash Bar mount by attaching via billet aluminum offset designed to effectively transfer the impact load to the crash bars. Because of the direct mount to the bars the frame avoids damage that can occur in a crash when frame sliders are bolted directly to the frame itself.

The sliders utilize plastic with good lubrication and wear properties so AltRider frame sliders can survive a longer slide than those made with other common materials. Additionally the ability to resist impact is high making the slider less likely to snap off or crack in a crash. We also chose to use high strength chromoly steel rod instead of commonly used all-thread or stainless steel ( read more about why).

Crash bars are available in silver or black.

NOTE:This kit does not include the short engine bolt required to run the crash bars without the frame sliders. If you would like the option to run the crash bars alone you should order the crash bars and frame sliders individually.

An additional light mount kit is available for the 2015 and newer models to mount the OEM lights to the crash bars. Select ?with light mount kit・from the drop-down menu to include this kit. Light mount kit not available for 2010-2014 model crash bars.

Please note - crash bars interfere with original mounting point of OEM auxiliary lights mounting kit is required to continue use of OEM lights.

●写真注意
※画像はイメージです。

車種年式型式・フレームNo.その他
Multistrada 12002015〜

※その他の適合車種については、メーカーサイトなどをご覧ください。

アルトライダー ALTRIDER スライダー類 フレーム
価格
77,550円 (税込 83,754 円)
※最安送料での配送をご希望の場合、注文確認画面にて配送方法の変更が必要な場合があります。
※離島・一部地域は追加送料がかかる場合があります。
取寄※在庫があれば2-3営業日で発送
個数 
未選択項目があります
選択肢を選んでから買い物かごに入れてください
未選択項目があります
選択肢を選んでから買い物かごに入れてください
お気に入りに追加
お気に入りに追加
レビューを書く

TOPへ